{"id":96,"date":"2023-04-03T10:53:43","date_gmt":"2023-04-03T02:53:43","guid":{"rendered":"http:\/\/panelbenders.com\/?post_type=product&p=96"},"modified":"2023-04-03T15:11:11","modified_gmt":"2023-04-03T07:11:11","slug":"flexible-bending-center","status":"publish","type":"product","link":"http:\/\/panelbenders.com\/?product=flexible-bending-center","title":{"rendered":"Flexible bending center"},"content":{"rendered":"

III.<\/b><\/strong>Main technical parameters<\/b><\/strong><\/p>\n

MODEL: C1-2500<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
NO.<\/b><\/strong><\/td>\nNAME<\/b><\/strong><\/td>\nUNIT<\/b><\/strong><\/td>\nPARAMETER<\/b><\/strong><\/td>\n<\/tr>\n
1.<\/td>\nFeeding structure<\/td>\n\/<\/td>\nPress arm type<\/td>\n<\/tr>\n
2.<\/td>\nMax. bending length<\/td>\nmm<\/td>\n2500<\/td>\n<\/tr>\n
3.<\/td>\nMax. bending height<\/td>\nmm<\/td>\n170(optional 300)<\/td>\n<\/tr>\n
4.<\/td>\nMin. bending height<\/td>\nmm<\/td>\n4<\/td>\n<\/tr>\n
5.<\/td>\nMin. molding size of four sides<\/td>\nmm<\/td>\n330*330<\/td>\n<\/tr>\n
6.<\/td>\nMin.\u00a0molding size of one side<\/td>\nmm<\/td>\n200<\/td>\n<\/tr>\n
7.<\/td>\nMin.\u00a0arc radius<\/td>\nmm<\/td>\n1.2<\/td>\n<\/tr>\n
8.<\/td>\nMin.\u00a0continuous bending speed<\/td>\nS<\/td>\n0.2<\/td>\n<\/tr>\n
9.<\/td>\nBending angle<\/td>\nDegree<\/td>\n0-180<\/td>\n<\/tr>\n
10.<\/td>\nNumber of control axes<\/td>\n<\/td>\n10 (most up to 15)<\/td>\n<\/tr>\n
11.<\/td>\nMax. feeding speed<\/td>\nm\/min<\/td>\n120<\/td>\n<\/tr>\n
12.<\/td>\nDimension<\/td>\nmm<\/td>\n6200*4300*2500<\/td>\n<\/tr>\n
13.<\/td>\nTotal power<\/td>\nKW<\/td>\n43\/45<\/td>\n<\/tr>\n
14.<\/td>\nAverage power<\/td>\nKW<\/td>\n2<\/td>\n<\/tr>\n
15.<\/td>\nWorking table structure<\/td>\n\/<\/td>\nBrush<\/td>\n<\/tr>\n
16.<\/td>\nSpeed adjustment<\/td>\n<\/td>\nStandard<\/td>\n<\/tr>\n
17.<\/td>\nAdvanced instructions<\/td>\n<\/td>\nStandard<\/td>\n<\/tr>\n
18.<\/td>\nArc instructions<\/td>\n<\/td>\nStandard<\/td>\n<\/tr>\n
19.<\/td>\nCrushed edge instructions<\/td>\n<\/td>\nStandard<\/td>\n<\/tr>\n
20.<\/td>\nLoading robot interface<\/td>\n<\/td>\nStandard<\/td>\n<\/tr>\n
21.<\/td>\nHinge knife<\/td>\n<\/td>\nOptional<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

IV.<\/b><\/strong>Main component<\/b><\/strong>s<\/b><\/strong>\u00a0configuration<\/b><\/strong>s<\/b><\/strong>\u00a0list<\/b><\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
NO.<\/b><\/strong><\/td>\nNAME<\/b><\/strong><\/td>\nBRAND<\/b><\/strong><\/td>\nORIGIN<\/b><\/strong><\/td>\n<\/tr>\n
1<\/td>\nSystem control unit<\/td>\nSMART CNC<\/td>\nChina<\/td>\n<\/tr>\n
2<\/td>\nServo unit<\/td>\nDesignated R&D<\/td>\nJoint venture<\/td>\n<\/tr>\n
3<\/td>\nLinear guides<\/td>\nRexroth<\/td>\nGermany<\/td>\n<\/tr>\n
4<\/td>\nBall screw<\/td>\nHIWIN<\/td>\nTaiwan, China<\/td>\n<\/tr>\n
5<\/td>\nMain electrical components<\/td>\nSchneider<\/td>\nFrance<\/td>\n<\/tr>\n
6<\/td>\nPneumatic components<\/td>\nSMART CNC<\/td>\nTaiwan, China<\/td>\n<\/tr>\n
7<\/td>\nBearing<\/td>\nNSK<\/td>\nJapan<\/td>\n<\/tr>\n
8<\/td>\nReducer<\/td>\nDesignated R&D<\/td>\nChina<\/td>\n<\/tr>\n
9<\/td>\nBending machine body<\/td>\nSMART CNC<\/td>\nChina<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/b><\/strong><\/p>\n

V.<\/b><\/strong>Bending thickness range<\/b><\/strong><\/p>\n\n\n\n\n\n\n
NO.<\/b><\/strong><\/td>\nPLATE MATERIAL<\/b><\/strong><\/td>\nUNIT<\/b><\/strong><\/td>\nMAX. THICKNESS<\/b><\/strong><\/td>\n<\/tr>\n
\u00a0\u00a0\u00a01.<\/td>\nStainless steel (SUS)<\/td>\nmm<\/td>\n1.5<\/td>\n<\/tr>\n
\u00a0\u00a0\u00a02.<\/td>\nCarbon steel (MS)<\/td>\nmm<\/td>\n2.5<\/td>\n<\/tr>\n
\u00a0\u00a0\u00a03<\/td>\nAluminum (AL)<\/td>\nmm<\/td>\n3<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Remarks: The bending <\/b><\/strong>toolings<\/b><\/strong>\u00a0can be customized according to the thickness of the user’s sheet<\/b><\/strong>s.<\/b><\/strong><\/p>\n

 <\/p>\n

VI.<\/b><\/strong>Introduction of bending main body and bending demonstration<\/b><\/strong><\/p>\n

    \n
  1. 1<\/b><\/strong>.<\/b><\/strong>Introduction <\/b><\/strong>o<\/b><\/strong>f<\/b><\/strong>the bending <\/b><\/strong>main <\/b><\/strong>body<\/b><\/strong><\/li>\n<\/ol>\n

    \"\"\u00a0<\/b><\/strong><\/p>\n

     <\/p>\n

    \u25c6 Servo flexible bending center main body, the main body adopts high-strength welding structure, the main structure structure is stable, and the service life is long.<\/p>\n

    \u25c6 Heat treatment to remove internal stress, strong rigidity, heavy tonnage, ensure long-term stability of the machine accuracy, and improve the bending accuracy, reliability and durability of the machine.<\/p>\n

     <\/p>\n

      \n
    1. B<\/b><\/strong>ending demonstration<\/b><\/strong><\/li>\n<\/ol>\n

      \u25c6Down bending demo<\/b><\/strong>nstration<\/b><\/strong>\u00a0<\/b><\/strong><\/p>\n

      \"\"<\/p>\n

       <\/p>\n

      \u25c6<\/b><\/strong>Upper <\/b><\/strong>bending demo<\/b><\/strong>nstration<\/b><\/strong><\/p>\n

      \"\"<\/p>\n

       <\/p>\n

        \n
      1. Main parts<\/b><\/strong><\/li>\n<\/ol>\n

        \"\"<\/p>\n

        Taiwan HIWIN <\/b><\/strong>b<\/b><\/strong>all <\/b><\/strong>s<\/b><\/strong>crew<\/b><\/strong><\/p>\n

        \"\"<\/p>\n

         <\/p>\n

        G<\/b><\/strong>ermany <\/b><\/strong>Rexroth linear guide<\/b><\/strong><\/p>\n

        \"\"<\/p>\n

         <\/p>\n

        Japan NSK imported bearings<\/b><\/strong><\/p>\n

        \u00a0<\/b><\/strong><\/p>\n

        VII.<\/b><\/strong>Random <\/b><\/strong>documents<\/b><\/strong>, random accessories<\/b><\/strong><\/p>\n

          \n
        1. Random documents<\/b><\/strong><\/li>\n<\/ol>\n\n\n\n\n\n\n\n\n
          NO.<\/b><\/strong><\/td>\nNAME<\/b><\/strong><\/td>\nQTY<\/b><\/strong><\/td>\nREMARK<\/b><\/strong><\/td>\n<\/tr>\n
          1.<\/td>\nEquipment packing list<\/td>\n1<\/td>\n<\/td>\n<\/tr>\n
          2.<\/td>\nCertificate of Compliance<\/td>\n1<\/td>\n<\/td>\n<\/tr>\n
          3.<\/td>\nUser’s manual<\/td>\n1<\/td>\n<\/td>\n<\/tr>\n
          4.<\/td>\nElectrical schematic diagram<\/td>\n1<\/td>\n<\/td>\n<\/tr>\n
          5.<\/td>\nCNC system information<\/td>\n1<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
            \n
          1. <\/b>random accessories<\/b><\/strong><\/li>\n<\/ol>\n\n\n\n\n\n\n\n\n\n\n
            NO.<\/b><\/strong><\/td>\nNAME<\/b><\/strong><\/td>\nSPECIFICATION<\/b><\/strong><\/td>\nQTY<\/b><\/strong><\/td>\n<\/tr>\n
            1.<\/td>\nQuick-plug air gun<\/td>\n<\/td>\n1 SET<\/td>\n<\/tr>\n
            2.<\/td>\nAllen wrench<\/td>\nS1.5-S10<\/td>\n1\u00a0SET<\/td>\n<\/tr>\n
            3.<\/td>\nEquipment foot pad<\/td>\n<\/td>\n1 SET<\/td>\n<\/tr>\n
            4.<\/td>\nHose<\/td>\n\u00d8 8<\/td>\n5\u00a0METERS<\/td>\n<\/tr>\n
            5.<\/td>\nT type tee<\/td>\n\u00d8 8<\/td>\n2\u00a0SETS<\/td>\n<\/tr>\n
            6.<\/td>\nNylon cable tie<\/td>\nL200<\/td>\n30\u00a0LINES<\/td>\n<\/tr>\n
            7.<\/td>\nSocket head cap screws<\/td>\nM10*45 \u00a012.9\u00a0level<\/td>\n6\u00a0SETS<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

            VIII.<\/b><\/strong>User cooperation matters<\/b><\/strong><\/p>\n

              \n
            1. Power supply: 3Phase Customized,the voltage fluctuation is -5%\uff5e+10%; when the voltage fluctuates greatly, the user must be equipped with a voltage stabilizer, otherwise it will cause the low-voltage electrical appliance to be in an abnormal working state, and the life of the electrical device will be reduced or broken,processing products are scrapped, motor alarms cause stop\u00a0working, computer hard disk damage and other problems.<\/li>\n
            2. Air source: output above 0.6Mpa, dry and clean compressed air, air supply volume 0.3m3\/min; if the air is not dry enough, the user should be equipped with a refrigeration dryer, otherwise there will be water in the pneumatic componentsand thencause the frictional resistance of the piston to increase, also\u00a0the wear of the sealing ring will cause air leakage and other problems. Especially in winter, it is easy to freeze, leading to aggravated damage to the pneumatic components.<\/li>\n
            3. Ambient temperature: 0\u00b0C \uff5e +40\u00b0C; lower than 0\u00b0C will cause the oil-water separator, gas tank and other partswith watermay freeze. The lubricating oil will be too viscous due to low temperature, which will affect the lubrication effect,\u00a0which resulting in damage or failure of components.<\/li>\n
            4. Environmental humidity: relative humidity 20\uff5e80%RH (non-condensing).<\/li>\n
            5. Keep away from strong vibration sources and electromagnetic interference; if the distance is too close, users must be equipped with filters, otherwise it will cause computer screen flickering, LED light flickering, driver alarm, encoder abnormality, or interference with other nearby equipment.<\/li>\n
            6. Theenvironment with little dust, no harmful and corrosive gases.<\/li>\n
            7. The foundation is prepared according to the supplier’s foundation plan.<\/li>\n
            8. The user should select personnel who have a high school level or above, understand basic computer operations, and can work in this position for a long time for training.<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"

              After 10\u00a0years of technical research,\u00a0technical research and development department has developed a servo panel bender\u00a0with international advanced level. The bending speed is only 0.2 seconds every bending. The equipment can automatically up\u00a0bending\u00a0and down\u00a0bending\u00a0according to the bending process. It realizes the combined bending of arcs, dead edges, and various angles, and can achieve various bending requirements without changing the bending tools, which saving a lot of labor and mold costs for the enterprise.<\/p>\n

              The maximum processing plate size is 2000mmx1500mm, and it controls 10 axes:\u00a0X, Y, C, V1, V2, Z1, Z2, W1, W2, and P.<\/p>\n

              It adopts C-shaped pressing arm structure, and the ending adopts a crank connecting rod mechanism to drive the presser to press down, press the plate, and realize the feeding method of moving and rotating the plate.<\/p>\n","protected":false},"featured_media":103,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[18],"product_tag":[],"class_list":["post-96","product","type-product","status-publish","has-post-thumbnail","product_cat-uncategorized","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"http:\/\/panelbenders.com\/index.php?rest_route=\/wp\/v2\/product\/96","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/panelbenders.com\/index.php?rest_route=\/wp\/v2\/product"}],"about":[{"href":"http:\/\/panelbenders.com\/index.php?rest_route=\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"http:\/\/panelbenders.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=96"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/panelbenders.com\/index.php?rest_route=\/wp\/v2\/media\/103"}],"wp:attachment":[{"href":"http:\/\/panelbenders.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=96"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"http:\/\/panelbenders.com\/index.php?rest_route=%2Fwp%2Fv2%2Fproduct_cat&post=96"},{"taxonomy":"product_tag","embeddable":true,"href":"http:\/\/panelbenders.com\/index.php?rest_route=%2Fwp%2Fv2%2Fproduct_tag&post=96"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}